111 Tooth CDC Belt Black 11M-111T-10

$93.82

INTERNATIONAL AIR FREIGHT $30.

DOMESTIC FREIGHT $15 (FREE ON ORDERS OVER $150).

In stock

SKU: 9255-0939 Category:

Description

111 Tooth CDC Belt Black

Technical specifications for the 111 Tooth CDC Belt Black are given below. Note that with minor alignment adjustments, a CDC Mudport Belt can be replaced by the equivalent CDX Centertrack Belt, although the reverse is not true.

TEETH PITCH (MM) LENGTH (MM) WIDTH (MM) WEIGHT (G) MATERIAL
111 11 1221 10 78 Carbon fiber-reinforced polyurethane

Gates Carbon Drive belts are made with stretch-free carbon fiber tensile cords. The advanced urethane technology allows the belt to be weather resistant, flexible, and durable. Although Gates engineers have developed high performance belt drives for thousands of  industrial applications, Gates developed an entirely new belt to specifically meet performance requirements for the bicycle industry.

  • Urethane body is rust-proof, even after 192 hours of salt-spray test
  • Unlike chain, carbon fiber is length-stable and will not stretch
  • 11 mm pitch profile gives optimal belt drive performance to meet the demands of human power
  • Paired with the Gates patented sprockets, the system provides smooth and quiet meshing, and proven durability

**Proper installation is key, view the Owner’s Manual for more information.

THREE KEYS WHEN WORKING WITH CARBON DRIVE

HANDLING:

Gates Carbon Drive belts are highly durable and offer long life when properly handled. However, you must use caution before and during installation to avoid damaging the carbon tensile cords. Excessive bending and twisting creates invisible crimps, which can lead to belt breakage.

In handling the 111 Tooth CDC Belt Black, you must NOT:

– back bend
– use as a chainwhip
– bundle
– crimp
– twist, or
– invert

ALIGNMENT:

Alignment is critical. Depending on the particular bike and setup, you may therefore need to use spacers to ensure proper alignment. Noise, wear, or belt walk-off can be caused by sprockets that are out of alignment.

TENSIONING:

Finally, you need proper belt tension for optimum drive operation. For frames with vertical dropouts, changing a flat tire will not mean you need to re-tension your belt. Tensioning is also easy with the Gates Carbon Drive iPhone® app (available for free download in the iTunes® App store) or Carbon Drive Krikit Gauge or the ecotension tester (available in Europe). Unusually low tension can cause the belt to skip, thus leading to decreased performance. But don’t over-tension the belt, because this will cause drag and unnecessary wear.

TENSIONING RECOMMENDATIONS SMOOTH & STEADY PEDALING STYLE PUNCHY & ROUGH PEDALING STYLE
MOUNTAIN & SS URBAN 45-60 Hz (35-45 lbs) 60-75 Hz (45-53 lbs)
INTERNALLY GEARED HUB 35-50 Hz (28-40 lbs) 35-50 Hz (28-40 lbs)

These tension recommendations are a good starting point, which you may need to adjust higher or lower as a result of differing rider size, gear ratios, or power placed on the pedals.