Product Category

26 Tooth CDX Sprocket Surefit Alfine Nexus CT1126XMN

SKU 78980581

$221.34

In stock

26 Tooth CDX Sprocket Surefit Alfine Nexus

26 Tooth CDX Sprocket Surefit Alfine Nexus

Technical specifications for 26 Tooth CDX Sprocket Surefit Alfine Nexus are given below.

TYPE Rear
TEETH 26
MOUNTING STYLE SureFit™ 3-Lobe
PITCH (MM) 11
MATERIAL Stainless
FINISH Silver
WEIGHT (G) 103

Gates sprockets provide a slimmer profile, lighter weight and better debris shedding, thus giving maximum drive performance in all environments, including muddy or snowy conditions. The patented CenterTrack design keeps the belt aligned on the sprocket. See the Gates Belt Drive Owners Manual for further details.

To find the correct belt and sprocket combination for your ride, you can use the Calculate tab of the Gates Carbon Drive Tension Tool to obtain the centre distance and speed ratio for a defined belt and sprocket combination. For more advanced calculations, download the Gates Drive Calculator (Microsoft Excel file; click "Enable editing" after opening) or use the online Bicycle Drive Assistant.

THREE KEYS WHEN WORKING WITH CARBON DRIVE

HANDLING

Gates Carbon Drive belts are highly durable. They offer long life when properly handled. However, caution must be used during installation to avoid damaging the carbon tensile cords.  When they experience excessive bending and twisting, this creates crimps, which can lead to belt breakage.

Because of the risk of damage, in handling the belt, you must NOT:

  • back bend
  • use as a chainwhip
  • bundle
  • crimp
  • twist or
  • invert

ALIGNMENT

Alignment is critical. Hence, depending on the bike and setup, you may need to use spacers to ensure proper alignment. Noise, wear, or belt walk-off can be caused by sprockets that are out of alignment.

TENSIONING

Proper belt tension is needed for optimum operation of the Gates Carbon Drive system. Low tension can cause the belt to skip, and high tension can cause drag and unnecessary wear. Tensioning is possible using the Frequency tab of the Gates Carbon Drive Tension Tool phone app (available through the App Store).

The values below provide recommended starting values for belt tension, along with ranges within which the range can be adjusted to allow for differences in rider size, gear ratio and power on the pedals. Tension values in Hertz are obtained using the Gates Carbon Drive Tension Tool phone app; tension values in kilograms are obtained using the Krikit Belt Tension Meter.

 

TENSIONING GUIDE
Hub Type Application App Reading Krikit Reading
Internally Geared Pedal Bike 45 Hz (35–50 Hz) 16 kg (13–18 kg)
Front-hub Motor eBike
Mid-motor eBike 50 Hz (40–55 Hz) 18 kg (15–19 kg)
Conventional Mountain Bike 55 Hz (45–65 Hz) 19 kg (16–22 kg)
Pinion Gearbox Bike
Geared Mid-motor eBike
Cargo Bike
Single-speed Bike
Tandem Bike
Rear-hub Motor eBike

 

For frames with vertical dropouts, changing a flat tire does not require you to re-tension your belt.

See the Shop for further products.